Reasonable price Heat Transfer Ink Kit - Custom 60 degree washable heat transfer printing adhesive – Zamfun

1. Non-sticky film, high elasticity, yellowing resistance, washable to 60℃;
2. Scope of application:
For mark heat transfer, offset heat transfer printing; suitable for most cotton, polyester, nylon, spandex and other blended fabrics, such as T-shirts, sportswear, underwear, etc.
3. How to use:
Suitable for 60-150 mesh wire mesh, oven drying at 80℃/1-2 hours. Drying temperature and time can be adjusted according to workshop conditions and printing thickness, subject to actual drying.
4. Pressure 2-3bar
5. ironing temperature 140-160 degrees
6. Does not contain organic tin, pvc, phthalic acid, heavy metals.

1. Do not mix with other adhesives.
2. Only after one process sheet is dry can the next one be printed to ensure the thickness of the glue.
3. After printing, the glue should be left to dry naturally for more than 8 hours or bake at 50-60 degrees for 30 minutes before pressing and transferring it to the fabric.
4. After the transfer is completed, it should be placed for 1-2 hours before the elasticity and washing test can be carried out. 5. The screen printing glue should be set accurately, and the glue edge should be larger than the white ink edge.
6. Customers should fully stir the glue that has been added with hot melt powder. After use, they should conduct a pattern-making test. After passing the test, they can be carried out in batches. All adverse consequences caused by untested are borne by the customers themselves.
7. If you find any leakage or quality problems in the packaging after receiving the materials from our company, please contact our company in time. 8. The product is for industrial use, and it is forbidden for children to contact it. If it comes into contact with the eyes, immediately rinse it with running water for more than 15 minutes, and seek medical attention as appropriate. If it comes into contact with the skin, rinse it with soap and water. Test products must be tested 48 hours after finishing for best results.
9. Packaging specifications: glue packaging is 5-20KG/barrel (or packaging as required), and can be stored for 12 months within the temperature range of 5-30 °C (the warehouse should be cool, dry and ventilated)